中文 |
English |
Email Alert
防覆冰涂层构建机理及制备
Fabricating Mechanism and Preparation of Anti-Icing & Icephobic Coating
航空、通信、电力和运输设备的覆冰现象给人们的生产、生活带来许多不便，甚至引起重大经济损失，防覆冰涂层主要通过材料表面特殊物理化学性能与微相形貌来实现抗冰目的，这类材料需要兼具防结冰性和疏冰性，从延长结冰时间和降低冰的附着力两方面来减轻甚至消除冰雪积聚，是目前研究的热点。本文从防覆冰机理入手，深入探讨了防结冰性和疏冰性的影响因素，阐述了防覆冰涂层材料的设计与制备方面的最新进展，并对防覆冰涂层目前存在的问题与发展方向进行了分析和展望。
Ice adhesion and accretion on the facilities of aviation, telecommunication, electricity and transportation can lead to major inconvenience for our daily life and can even cause great economic losses. Therefore, it is worthwhile to study anti-icing and icephobic technology. Among all of them, concerning mechanical removing, electrothermal methods, spraying chemicals and coatings, anti-icing & icephobic coating is the research hotspot due to its obvious advantages such as low energy consumption, environmentally friendly and so on. It focuses on mitigating or even eliminating ice accumulation by extending freezing time and reducing ice adhesion strength. Extending freezing time is conducive to condensed water rolling off the substrates before it freezes via outside power, such as gravity, wind power and centrifugal force. Reducing ice adhesion strength makes de-icing procedure facile even if the condensed water has frozen on the substrates. It has been proved that by optimizing surface physicochemical properties and surface topography, both ideal effects can be achieved. On the basis of analyzing the mechanism, the influencing factors of anti-icing and icephobic properties are comprehensively discussed. Taking relative factors into consideration, a balance need to be reached between contradictory ones. Furthermore, the research progress of designing and fabricating anti-icing & icephobic coating is reviewed, including hydrophilic coating, hydrophobic coating and multi-functional composite coating. Finally, the prospective tendency of anti-icing & icephobic coating is proposed based on the current challenges.
Contents
1 Introduction
2 Mechanism for anti-icing & icephobic coating
2.1 Anti-icing
2.2 Icephobic
3 Progress in anti-icing & icephobic coating
3.1 Hydrophilic coating
3.2 Hydrophobic coating
3.3 Multi-functional composite coating
4 Prospective tendencies of anti-icing & icephobic coating
5 Conclusion
anti-icing & icephobic
[1] Dalili N, Edrisy A, Carriveau R. Renew. Sust. Energ. Rev., 2009, 13(2): 428.
[2] Farzaneh M, Ryerson C C. Cold. Reg. Sci. Technol., 2011, 65(1SI): 1.
[3] Raraty L E, Tabor D. Proc. R. Soc. London, Ser. A-Mathematical and physical sciences, 1958, 245(1241): 184.
[4] Onda T, Shibuichi S, Satoh N. Langmuir, 1996, 12(9): 2125.
[5] Young T. Philos. Trans. R. Soc. London, 1805, 95: 65.
[6] Li Y, Huang X J, Heo S H. Langmuir, 2007, 23(4): 2169.
[7] Zhan X L, Luo Z H, Zhang Q H, Chen F Q. Chin. Chem. Lett., 2009, 20(6): 729.
[8] 王琼燕(Wang Q Y), 张庆华(Zhang Q H), 詹晓力(Zhan X L). 化学进展(Progress in Chemistry), 2009(10): 2183.
[9] Zhang Q H, Luo Z H, Zhan X L, Chen F Q. Chin. Chem. Lett., 2009, 20(4): 478.
[10] Wang Q Y, Zhang Q H, Zhan X L, Chen F Q. J. Polym. Sci., Part A: Polym. Chem., 2010, 48(12): 2584.
[11] 钱涛(Qiao T), 汪涓涓(Wang J J), 张庆华(Zhang Q H). 高等学校化学学报(Chemical Journal of Chinese Universities), 2013, (03): 703.
[12] Jindasuwan S, Nimittrakoolchai O, Sujaridworakun P. Thin Solid Films, 2009, 517(17): 5001.
[13] Wenzel R N. Ind. Eng. Chem. Res., 1936, 28: 988.
[14] Cassie A, Baxter S. Transations of the Faraday Society, 1944, 40: 546.
[15] Wu X, Wang W. J. Eng. Thermophys, 2003, 24(2): 286.
[16] Tourkine P, Le Merrer M, Quere D. Langmuir, 2009, 25(13): 7214.
[17] Guo P, Zheng Y M, Wen M X. Adv. Mater., 2012, 24(19): 2642.
[18] He M, Wang J J, Li H L. Soft Matter, 2011, 7(8): 3993.
[19] Boinovich L B, Emelyanenko A M. Mendeleev Commun., 2013, 23(1): 3.
[20] Jung S, Dorrestijn M, Raps D. Langmuir, 2011, 27(6): 3059.
[21] Carter J T. US8221847B2, 2012.
[22] Yang T, Yang Z J, Singla M. J. Cold. Reg. Eng., 2012, 26(2): 55.
[23] Olsen K, Larsen F M, Grabau P. US6612810B1, 2003.
[24] 荆忠(Jing Z). CN102260444A, 2011.
[25] 袁晓燕(Yuan X Y), 朱孔营(Zhu K Y), 周建伟(Zhou J W). CN102268222A, 2011.
[26] Meuler A J, Smith J D, Varanasi K K. ACS Appl. Mat. Interfaces, 2010, 2(11): 3100.
[27] Petrenko V F, Whitworth R W. Physics of Ice. Oxford: Oxford University Press, 1999.
[28] The Role of Deicing and Anti-icing in the Air Force. Air Force Aircraft and Airfield Deicing/Anti-icing. http://infohouse. p2ric. org/ref/01/00593. pdf. (1998-05)[2013-05].
[29] Dotan A, Dodiuk H, Laforte C. J. Adhes. Sci. Technol., 2009, 23(15): 1907.
[30] Menini R, Farzaneh M. J. Adhes. Sci. Technol., 2011, 25(9): 971.
[31] Kulinich S A, Farzaneh M. Langmuir, 2009, 25(16): 8854.
[32] Furmidge C G. J. Colloid Interface Sci., 1962, 17(4): 309.
[33] Gao L C, Mccarthy T J. Langmuir, 2008, 24(17): 9183.
[34] Gao L C, Mccarthy T J. Langmuir, 2009, 25(24): 14105.
[35] Sarshar M A, Swarctz C, Hunter S. Colloid. Polym. Sci., 2013, 291(2): 427.
[36] Autumn K, Sitti M, Liang Y A. Proc. Natil Acad. Sci. U. S. A., 2002, 99(19): 12252.
[37] Matsumoto K, Daikoku Y. Int. Jrefrig., 2009, 32(3): 444.
[38] Petrenko V F, Qi S G. J. Appl. Phys., 1999, 86(10): 5450.
[39] Peng S L, Petrenko V F, Arakawa M. Effect of self-assembling monolayers (SAMs) on ice adhesion to metals. Warrendale: Materials Research Society, 2000: 586, 261.
[40] Petrenko V F, Peng S. Can. J. Phys., 2003, 81(1/2): 387.
[41] Petrenko V F. J. Appl. Phys., 1994, 76(2): 1216.
[42] Ryzhkin I A, Petrenko V F. J. Phys. Chem. B, 1997, 101(32): 6267.
[43] Petrenko V F. J. Phys. Chem. B, 1997, 101(32): 6276.
[44] Ryzhkin I A, Petrenko V F. J Exp Theor Phys., 2005, 101(2): 317.
[45] Sarkar D K, Farzaneh M. J. Adhes. Sci. Technol., 2009, 23(9): 1215.
[46] Huang Y F, Hu M J, Yi S P. Thin Solid Flims, 2012, 520(17): 5644.
[47] Antonini C, Innocenti M, Horn T. J. Adhes. Sci. Technol., 2011, 67(1/2): 58.
[48] Karmouch R, Ross G G. J. Phys. Chem. C. 2010, 114(9): 4063.
[49] Varanasi K K, Hsu M, Bhate N. Appl. Phys. Lett., 2009, 95: 0941019.
[50] Kulinich S A, Farhadi S, Nose K. Langmuir, 2011, 27(1): 25.
[51] Jellinek H, Kachi H, Kittaka S. Colloid. Polym. Sci., 1978, 256(6): 544.
[52] Matsumoto K, Kobayashi T. Int. J. Refrig., 2007, 30(5): 851.
[53] Kako T, Nakajima A, Irie H. J. Mater. Sci., 2004, 39(2): 547.
[54] Nakajima A. J. Ceram. Soc. Jpn., 2004, 112(1310): 533.
[55] Meyers A, Leicht R, Wiesenfeld A. US5935488A, 1999.
[56] Attar. A. J. US2009294724-A1, 2009.
[57] 李辉(Li H), 赵蕴慧(Zhao Y H), 袁晓燕(Yuan X Y). 化学进展(Progress in Chemistry). 2012, 24: 2087.
[58] Yuan Z Q, Bin J P, Wang X. Polym. Eng. Sci., 2012, 52(11): 2310.
[59] Menini R, Ghalmi Z, Farzaneh M. Cold Reg. Sci. Technol., 2011, 65(1SI): 65.
[60] Saleema N, Farzaneh M, Paynter R W. J. Adhes. Sci. Technol., 2011, 25(1/3): 27.
[61] Momen G, Farzaneh M. Superhydrophobic RTV silicone rubber coatings on anodized aluminium surfaces. Stafa-Zurich: Trans. Tech. Publications LTD, 2012: 706/709, 2546.
[62] Momen G, Farzaneh M, Jafari R. Appl. Surf. Sci., 2011, 257(15): 6489.
[63] Lee H J. J. Mater. Sci., 2012, 47(13): 5114.
[64] Murase H, Nanishi K, Kogure H. J. Appl. Polym. Sci., 1994, 54(13): 2051.
[65] Murase H, Fujibayashi T. Prog. Org. Coat., 1997, 31(1/2): 97.
[66] Croutch V K, Hartley R A. J. Coat. Technol., 1992, 64(815): 41.
[67] Laforte C, Laforte L J, Carriere C J. How a Solid Coating Can Reduce the Adhesion of Ice on a Structure. Brno, Czech Republic: International Workshop on Atmospheric Icing on Structures, 2002, 9: 1.
[68] Liu Z L, Gou Y J, Wang J T, Cheng Sh Y. Int. J. Heat Mass Transfer, 2008, 51(25/26): 5975.
[69] Menini R, Farzaneh M. Polym. Int., 2008, 57(1): 77.
[70] Safaee A, Sarkar D K, Farzaneh M. Appl. Surf. Sci., 2008, 254(8): 2493.
[71] Saleema N, Farzaneh M. Appl. Surf. Sci., 2008, 254(9): 2690.
[72] Sarkar D K, Farzaneh M, Paynter R W. Mater. Lett., 2008, 62(8/9): 1226.
[73] Arianpour F, Farzaneh M, Kulinich S A. Appl. Surf. Sci., 2013, 265: 546.
[74] Feng L, Zhang Y A, Xi J M. Langmuir, 2008, 24(8): 4114.
[75] Liu X J, Liang Y M, Zhou F, Liu W M, Soft Matter, 2012, 8(7): 2070.
[76] Kulinich S A, Farzaneh M. Cold Reg. Sci. Technol., 2011, 65(1SI): 60.
[77] Cheng Y T, Rodak D E. Appl. Phys. Lett., 2005, 86: 14410114.
[78] Wilson P W, Lu W, Xu H. Phys. Chem. Chem. Phys., 2013, 15(2): 581.
[79] Kim P, Wong T, Alvarenga J, Kreder M J, Adorno-Martinez W E, Aizenberg J. ACS Nano, 2012. 6(8): 6569.
[80] He M, Zhang Q L, Zeng X P, Cui D P, Chen J, Li H L, Wang J J, Song Y L. Adv. Mater., 2013, 25(16): 2291.
[81] He M, Zhou X, Zeng X P, Cui D P, Zhang Q L, Chen J, Li H L, Wang J J, Cao Z X, Song Y L. Jiang L. Soft Matter, 2012, 8: 6680.
[82] Zheng Y M, Han D, Zhai J. Appl. Phys. Lett., 2008, 92: 0841068.
[83] 曲爱兰(Qu A L), 文秀芳(Wen X F), 皮丕辉(Pi P H). 化学进展(Progress in Chemistry), 2006, 18(11): 1434.
[84] 赵宁(Zhao N), 卢晓英(Lu X Y), 张晓艳(Zhang X Y). 化学进展(Progress in Chemistry), 2007, 19(6): 860.
[85] Momen G, Farzaneh M. Micro & Nano Lett., 2011, 6(6): 405.
[86] Li H, Zhao Y H, Yuan X Y. Soft Matter, 2013, 9(4): 1005.
[87] Charpentier T, Neville A, Millner P. J. Colloid Interface Sci., 2013, 394: 539.
[88] 张毅(Zhang Y), 葛宋(Ge S), 张相雄(Zhang X X). 2012年中国工程热物理学会传热传质学学术年会(The Science Symposium on Heat and Mass Transfer, Chinese Society of Engineering Thermophysics). (东莞), 2012.
[89] Xiao J, Chaudhuri S. Langmuir, 2012, 28(9): 4434.
/
| 〈 |
|
〉 |
PDF
(2822KB)
